ABB DS201 & DS201M RCBOs | Models & Order Codes

ABB DS201 and DS201M are 1P+N residual current circuit breakers with overcurrent protection (RCBOs). They combine residual current, overload and short-circuit protection for individual single-phase circuits, unlike an F200 RCCB which requires separate overcurrent protection.

The existing list covers DS201 and DS201M references. Select the residual-current type and sensitivity as well as the overcurrent trip curve, rated current and breaking capacity; these are separate protection characteristics.

Combined Circuit Protection

DS201 RCBOs are used for individual outgoing circuits in residential, commercial and industrial installations. Combining the protection functions in one device allows each circuit to have its own residual-current and overcurrent protection. The device must suit the load, fault level and installation requirements.

DS201 & DS201M Ratings

Configuration: ABB documents DS201 and DS201M as 1P+N devices for single-phase circuits. Follow the phase/neutral terminal markings and connection instructions.
Breaking capacity: ABB technical data identifies Icn of 6 kA for DS201 and 10 kA for DS201M under IEC/EN 61009-1. DS201 L is a separate 4.5 kA version. Do not mix Icn with an Icu rating under a different test standard.
Voltage and sensitivity: ABB’s referenced DS201/DS201M technical data lists 230–240 V and model-dependent residual operating currents of 10, 30, 100 and 300 mA. Not every curve, current or residual-current type is available in every combination.

Residual-Current Type Is Not the Trip Curve

The existing table contains Type AC references with B or C overcurrent curves. In a designation such as DS201 B16 AC30, “B” is the overcurrent trip curve, not Type B residual-current protection. Select the RCD type from the separate type designation and official product data.

Type AC: detects sinusoidal AC earth-fault currents. Check the load waveform and local requirements before selecting it.
Type A: ABB documents separately designated variants for sinusoidal AC and pulsating DC residual current. Do not assume an AC reference has Type A performance.
Type F: ABB documents specific DS201M F variants. Their dedicated data and IEC/EN 62423 requirements must be checked; do not transfer Type F performance to the AC references in this table.
AP-R or other special versions: use their own immunity, timing and approval information. No Type B residual-current capability is claimed for these DS201/DS201M entries.

Standards & Selecting a Circuit

ABB specifies IEC/EN 61009-1 and IEC/EN 61009-2-1 for the referenced DS201/DS201M RCBOs. Regional or specially designated versions require their own documentation. A 30 mA device may be used for additional protection where the installation rules require it; a higher IΔn value or time-delayed version is not automatically equivalent for that purpose.

Confirm AC supply voltage and frequency, circuit and conductor current rating, poles, load starting current, trip curve, IΔn and expected fault-current waveform. Check prospective short-circuit current against the exact Icn rating, together with upstream coordination and installation conditions. Obtain the connected equipment manufacturer’s RCD requirement for electronic loads.

Related pages: Residual Current Protection category, MCB category and F200 RCCBs. F200 and DS201 have different protection functions; this link does not establish interchangeability.

ABB references: DS201 family overview; DS201 / DS201M ratings and versions; Dedicated Type F documentation.

Existing Model References

DS201 B16 AC30 → 2CSR255080R1165
DS201 C16 AC30 → 2CSR255080R1164
DS201 C32 AC30 → 2CSR255080R1324
DS201 C40 AC300 → 2CSR255080R3404

ABB DS201 & DS201M Models & Order Codes

Search the existing references by model, Order Code or listed specification. Check the complete designation and ABB data; the overcurrent curve and RCD type are separate fields. The table’s breaking-capacity values must be matched to the applicable standard and voltage.

58 models shown

Product Model	ABB Order Code	Series	Configuration	Rated Current (A)	Sensitivity (mA)	Trip Curve	RCD Type	Breaking Capacity
DS201 B6 AC30	2CSR255080R1065	DS201	1P+N	6	30	B	AC	6 kA
DS201 B10 AC30	2CSR255080R1105	DS201	1P+N	10	30	B	AC	6 kA
DS201 B13 AC30	2CSR255080R1135	DS201	1P+N	13	30	B	AC	6 kA
DS201 B16 AC30	2CSR255080R1165	DS201	1P+N	16	30	B	AC	6 kA
DS201 B20 AC30	2CSR255080R1205	DS201	1P+N	20	30	B	AC	6 kA
DS201 B25 AC30	2CSR255080R1255	DS201	1P+N	25	30	B	AC	6 kA
DS201 B32 AC30	2CSR255080R1325	DS201	1P+N	32	30	B	AC	6 kA
DS201 B40 AC30	2CSR255080R1405	DS201	1P+N	40	30	B	AC	6 kA
DS201 B6 AC300	2CSR255080R3065	DS201	1P+N	6	300	B	AC	6 kA
DS201 B10 AC300	2CSR255080R3105	DS201	1P+N	10	300	B	AC	6 kA
DS201 B13 AC300	2CSR255080R3135	DS201	1P+N	13	300	B	AC	6 kA
DS201 B16 AC300	2CSR255080R3165	DS201	1P+N	16	300	B	AC	6 kA
DS201 B20 AC300	2CSR255080R3205	DS201	1P+N	20	300	B	AC	6 kA
DS201 B25 AC300	2CSR255080R3255	DS201	1P+N	25	300	B	AC	6 kA
DS201 B32 AC300	2CSR255080R3325	DS201	1P+N	32	300	B	AC	6 kA
DS201 B40 AC300	2CSR255080R3405	DS201	1P+N	40	300	B	AC	6 kA
DS201 C6 AC30	2CSR255080R1064	DS201	1P+N	6	30	C	AC	6 kA
DS201 C10 AC30	2CSR255080R1104	DS201	1P+N	10	30	C	AC	6 kA
DS201 C16 AC30	2CSR255080R1164	DS201	1P+N	16	30	C	AC	6 kA
DS201 C20 AC30	2CSR255080R1204	DS201	1P+N	20	30	C	AC	6 kA
DS201 C25 AC30	2CSR255080R1254	DS201	1P+N	25	30	C	AC	6 kA
DS201 C32 AC30	2CSR255080R1324	DS201	1P+N	32	30	C	AC	6 kA
DS201 C40 AC30	2CSR255080R1404	DS201	1P+N	40	30	C	AC	6 kA
DS201 C6 AC300	2CSR255080R3064	DS201	1P+N	6	300	C	AC	6 kA
DS201 C10 AC300	2CSR255080R3104	DS201	1P+N	10	300	C	AC	6 kA
DS201 C16 AC300	2CSR255080R3164	DS201	1P+N	16	300	C	AC	6 kA
DS201 C20 AC300	2CSR255080R3204	DS201	1P+N	20	300	C	AC	6 kA
DS201 C25 AC300	2CSR255080R3254	DS201	1P+N	25	300	C	AC	6 kA
DS201 C32 AC300	2CSR255080R3324	DS201	1P+N	32	300	C	AC	6 kA
DS201 C40 AC300	2CSR255080R3404	DS201	1P+N	40	300	C	AC	6 kA
DS201M B6 AC30	2CSR275080R1065	DS201M	1P+N	6	30	B	AC	10 kA
DS201M B10 AC30	2CSR275080R1105	DS201M	1P+N	10	30	B	AC	10 kA
DS201M B16 AC30	2CSR275080R1165	DS201M	1P+N	16	30	B	AC	10 kA
DS201M B20 AC30	2CSR275080R1205	DS201M	1P+N	20	30	B	AC	10 kA
DS201M B25 AC30	2CSR275080R1255	DS201M	1P+N	25	30	B	AC	10 kA
DS201M B32 AC30	2CSR275080R1325	DS201M	1P+N	32	30	B	AC	10 kA
DS201M B40 AC30	2CSR275080R1405	DS201M	1P+N	40	30	B	AC	10 kA
DS201M B6 AC300	2CSR275080R3065	DS201M	1P+N	6	300	B	AC	10 kA
DS201M B10 AC300	2CSR275080R3105	DS201M	1P+N	10	300	B	AC	10 kA
DS201M B16 AC300	2CSR275080R3165	DS201M	1P+N	16	300	B	AC	10 kA
DS201M B20 AC300	2CSR275080R3205	DS201M	1P+N	20	300	B	AC	10 kA
DS201M B25 AC300	2CSR275080R3255	DS201M	1P+N	25	300	B	AC	10 kA
DS201M B32 AC300	2CSR275080R3325	DS201M	1P+N	32	300	B	AC	10 kA
DS201M B40 AC300	2CSR275080R3405	DS201M	1P+N	40	300	B	AC	10 kA
DS201M C6 AC30	2CSR275080R1064	DS201M	1P+N	6	30	C	AC	10 kA
DS201M C10 AC30	2CSR275080R1104	DS201M	1P+N	10	30	C	AC	10 kA
DS201M C16 AC30	2CSR275080R1164	DS201M	1P+N	16	30	C	AC	10 kA
DS201M C20 AC30	2CSR275080R1204	DS201M	1P+N	20	30	C	AC	10 kA
DS201M C25 AC30	2CSR275080R1254	DS201M	1P+N	25	30	C	AC	10 kA
DS201M C32 AC30	2CSR275080R1324	DS201M	1P+N	32	30	C	AC	10 kA
DS201M C40 AC30	2CSR275080R1404	DS201M	1P+N	40	30	C	AC	10 kA
DS201M C6 AC300	2CSR275080R3064	DS201M	1P+N	6	300	C	AC	10 kA
DS201M C10 AC300	2CSR275080R3104	DS201M	1P+N	10	300	C	AC	10 kA
DS201M C16 AC300	2CSR275080R3164	DS201M	1P+N	16	300	C	AC	10 kA
DS201M C20 AC300	2CSR275080R3204	DS201M	1P+N	20	300	C	AC	10 kA
DS201M C25 AC300	2CSR275080R3254	DS201M	1P+N	25	300	C	AC	10 kA
DS201M C32 AC300	2CSR275080R3324	DS201M	1P+N	32	300	C	AC	10 kA
DS201M C40 AC300	2CSR275080R3404	DS201M	1P+N	40	300	C	AC	10 kA

Request a DS201 Quote

Send the full DS201 or DS201M model, ABB Order Code / Article Number, quantity and destination country. For selection support, include supply voltage, load current and starting characteristics, trip curve, RCD type, IΔn, required Icn and local standard. Provide the existing device’s nameplate and upstream protection details where relevant.

Technical Documents

Request a Quote